One of the worst mistakes that a homeowner can make is ignoring the possibility of water damage to their home. While it may not seem like the steam in your bathroom from your showers or baths can do a lot of damage to the room, over time it can discolor the ceiling and eventually cause the drywall to sag down and possibly even collapse. You can imagine what kind of damage to the value of your home this can do and if you have purchased a home with water damage to the floors or ceiling, you know how much of a headache it can be to remodel it.
The answer to the steam problem is to install a simple exhaust vent in the ceiling over the tub or shower. This allows the steam to escape outside the room and the house and stops it from being absorbed by your ceiling drywall. You can often paint over the discoloration of the drywall after it has been damaged, but if the slab is sagging or cracked in the middle, it needs to be replaced as soon as possible. The last thing you want is for a loved one to be in the bath and the ceiling collapse on them.
Mold is also a threat to this and other moist rooms in the house. Mildew also tends to build up on tile and stone. Mildew and mold are close to the same thing, since they are both fungi, but mold tends to grow on more porous surfaces.
We have all heard horror stories of the bath tub or the toilet falling through the floor and unfortunately, most of the time this is due to the floor boards rotting. Too much water has soaked the floor over the years and has caused the boards to become flimsy. You can prevent this by making sure the floor of your bathroom is a hard, non-porous surface such as tile. The floor should be completely water tight and you may want to even install a drain on the bathroom floor, just to make sure the water goes where it is supposed to.
Even if you have a watertight floor, keeping the bathroom as dry as possible is a good idea. Always dry off the floor and other surfaces in the room after you get done with your shower. This helps lower the humidity in the room and ensures that the person who comes in the room after you does not slip and fall.
Showing posts with label water damage. Show all posts
Showing posts with label water damage. Show all posts
Sunday, January 27, 2008
Water Underneath Your Home
Unless your have a basement, not many people care much for venturing into that little door that leads underneath your home. The crawl space under there can vary from house to house. If you have ever had the pleasure of going in there, then you know how spooky it can be. It is usually very dark with lots of long ago vacated cobwebs and possibly some more recent occupied ones. It is also a great place for snakes to creep into, as well as mice and small animals.
You might not ever want to go under there, but an occasional look around into the dark depths with a flashlight might be a good thing. Not knowing what is going on under there can result in some bad consequences if left undetected.
If you happen to have central heating and air ductwork running underneath your home, any of the places it may have came loose can cause you to lose heating and cooling efficiency, in turn causing more strain on your unit and your wallet. Brackets holding the duct work off the ground could work loose or rust. It probably won’t happen, but you never know.
A more serious problem can occur if water leakage happens. This can be really bad if it is occurring around the foundation of your home. Over time, it can cause foundation failure. When this happens, the walls inside your home can become affected as well. If you find water under the house it needs to be addressed as soon as possible. Water damage in any form is never good.
Leaking pipes can cause water to puddle in spots under the house also. It does not sound too bad unless the leak happens to be wetting the floor joist. Eventually, it will cause rotting and molding to occur. This can lead to floor damage that can be costly and not easy to repair.
Outside water spigots are another thing you do not worry about until you start to use it and have problems. Usually the handle will start to slip and will not shut off completely. This is very easy to notice, but leaks can also develop in the piping behind the foundation walls where you can not see.
So, if you do go under your house just to have a look around, keep these few things in mind to check out while you are there. A little prevention really can go a long way towards saving time and money later on.
You might not ever want to go under there, but an occasional look around into the dark depths with a flashlight might be a good thing. Not knowing what is going on under there can result in some bad consequences if left undetected.
If you happen to have central heating and air ductwork running underneath your home, any of the places it may have came loose can cause you to lose heating and cooling efficiency, in turn causing more strain on your unit and your wallet. Brackets holding the duct work off the ground could work loose or rust. It probably won’t happen, but you never know.
A more serious problem can occur if water leakage happens. This can be really bad if it is occurring around the foundation of your home. Over time, it can cause foundation failure. When this happens, the walls inside your home can become affected as well. If you find water under the house it needs to be addressed as soon as possible. Water damage in any form is never good.
Leaking pipes can cause water to puddle in spots under the house also. It does not sound too bad unless the leak happens to be wetting the floor joist. Eventually, it will cause rotting and molding to occur. This can lead to floor damage that can be costly and not easy to repair.
Outside water spigots are another thing you do not worry about until you start to use it and have problems. Usually the handle will start to slip and will not shut off completely. This is very easy to notice, but leaks can also develop in the piping behind the foundation walls where you can not see.
So, if you do go under your house just to have a look around, keep these few things in mind to check out while you are there. A little prevention really can go a long way towards saving time and money later on.
Your Allergies May Be More Related To Mold Than Healthy
With the teeming masses of people in the world that suffer from allergies, no matter the number of medications used, it is nearly impossible for them to find an escape from their allergens. The reasons for seasonal allergy symptoms are many. Most allergies are attributed to grasses, pollens, and various kinds of mold. Now, these three allergens are incapable of growing during the winter time. And while some molds can withstand colder temperatures than others, the majority of molds cannot continue to grow in these cold temperatures. Instead they manage to lie dormant for quite some time. They go into a kind of suspended animation when frozen, and if they thaw they will continue to live and they are equally as dangerous as before the time they were frozen.
However, in some areas of the world there is not a winter, and therefore, no freezing temperatures. And in these areas, people who live in apartment complexes and places of this nature are faced with considerable risk of infection, especially those who are highly allergic to these molds. The list of symptoms experience from an allergic reaction is long and varied, depending entirely on the specific allergy. The most prominent symptoms are runny noses and skin rashes. Perennial allergic rhinitis can be brought on by the presence of mold, as well. However, these allergic complications are usually only brought on by a high population of mold. The symptoms, however, can worsen if food that has been created using a type of fungus, such as mushrooms, bread, beer, and even yogurt. Blue cheese is also a chief offender.
While there are thousands of species of molds on the planet, the number of highly allergenic molds are fortunately only in the dozens. Cladosporium, Penicillium, and Alternaria are the three most well known kinds of mold to cause many allergic reactions. As a bit of trivia, Penicillum is the only genus with both a medicine as well as a disease named after it.
It is important that you stay on constant watch for grass, mold spores and pollen counts for each day on the news, if you have allergies. These daily reports are recommended, especially for the elderly or anyone who has a small child who may be allergic, and are planning an outing. This way, it will be apparent which areas to avoid. Severe allergic reactions are rare occurrences, but they happen never the less.
However, in some areas of the world there is not a winter, and therefore, no freezing temperatures. And in these areas, people who live in apartment complexes and places of this nature are faced with considerable risk of infection, especially those who are highly allergic to these molds. The list of symptoms experience from an allergic reaction is long and varied, depending entirely on the specific allergy. The most prominent symptoms are runny noses and skin rashes. Perennial allergic rhinitis can be brought on by the presence of mold, as well. However, these allergic complications are usually only brought on by a high population of mold. The symptoms, however, can worsen if food that has been created using a type of fungus, such as mushrooms, bread, beer, and even yogurt. Blue cheese is also a chief offender.
While there are thousands of species of molds on the planet, the number of highly allergenic molds are fortunately only in the dozens. Cladosporium, Penicillium, and Alternaria are the three most well known kinds of mold to cause many allergic reactions. As a bit of trivia, Penicillum is the only genus with both a medicine as well as a disease named after it.
It is important that you stay on constant watch for grass, mold spores and pollen counts for each day on the news, if you have allergies. These daily reports are recommended, especially for the elderly or anyone who has a small child who may be allergic, and are planning an outing. This way, it will be apparent which areas to avoid. Severe allergic reactions are rare occurrences, but they happen never the less.
Learn How To Identify What Kind Of Mold: Mold Identification
Mold is bad for us, we all know that, but just what different kinds of mold are there? They have been around since before the time of Christ and yet some people do not think that they need to be taken seriously as a real health threat. It grows everywhere and its one purpose in the natural world is to decompose dead organic matter. It is in our homes and on our lawns, on our food and on our clothes. You cannot truly do anything to completely get rid of it, but what you can do is educate yourself about what kinds of mold there are, what they can do to you, and how you can get rid of them.
There are about three different categories that a mold is classified into: pathogenic, allergenic, and toxic. The line between pathogenic molds and toxic molds is a little difficult to discern, but the allergenic mold class is not as dangerous as the other two.
Allergenic molds can either cause allergies or make allergies that a person already has even worse. It can make such things as asthma and emphysema aggravated and more difficult to deal with. The very young and the elderly particularly have a problem with these molds, because their immune systems are not as strong as a healthy young or middle aged adult. Symptoms include typical allergy symptoms such as coughing, sneezing, itchy or watery eyes, skin rashes, and etcetera.
Toxic molds produce what are called mycotoxins and even though these kinds of molds are not as common as allergenic or even pathogenic molds, they are extremely dangerous. These molds can even cause the death of a person if the circumstances are extreme enough and while “toxic black mold” has become a common term used in the news, it is usually referring to Stachybotrys atra or some other variant of Stachybotrys. This mold is typically found on wet items, especially on wet paper or woods. This mold has also been known to cause a baby to bleed from the lungs.
Pathogenic molds are molds that tend to cause opportunistic infections in people, such as penicilliosis, which is the third most common opportunistic infection in HIV patients in southeast Asia. This is a serious problem and anyone with a weakened immune system is very much at risk for contracting this condition, even if you are simply traveling to the region for a few days.
There are about three different categories that a mold is classified into: pathogenic, allergenic, and toxic. The line between pathogenic molds and toxic molds is a little difficult to discern, but the allergenic mold class is not as dangerous as the other two.
Allergenic molds can either cause allergies or make allergies that a person already has even worse. It can make such things as asthma and emphysema aggravated and more difficult to deal with. The very young and the elderly particularly have a problem with these molds, because their immune systems are not as strong as a healthy young or middle aged adult. Symptoms include typical allergy symptoms such as coughing, sneezing, itchy or watery eyes, skin rashes, and etcetera.
Toxic molds produce what are called mycotoxins and even though these kinds of molds are not as common as allergenic or even pathogenic molds, they are extremely dangerous. These molds can even cause the death of a person if the circumstances are extreme enough and while “toxic black mold” has become a common term used in the news, it is usually referring to Stachybotrys atra or some other variant of Stachybotrys. This mold is typically found on wet items, especially on wet paper or woods. This mold has also been known to cause a baby to bleed from the lungs.
Pathogenic molds are molds that tend to cause opportunistic infections in people, such as penicilliosis, which is the third most common opportunistic infection in HIV patients in southeast Asia. This is a serious problem and anyone with a weakened immune system is very much at risk for contracting this condition, even if you are simply traveling to the region for a few days.
Water Damage, Mold, and Mildew. Killing The Mold Or it's Chances of Coming Back.
One of the worst mistakes that a homeowner can make is ignoring the possibility of water damage to their home. While it may not seem like the steam in your bathroom from your showers or baths can do a lot of damage to the room, over time it can discolor the ceiling and eventually cause the drywall to sag down and possibly even collapse. You can imagine what kind of damage to the value of your home this can do and if you have purchased a home with water damage to the floors or ceiling, you know how much of a headache it can be to remodel it.
The answer to the steam problem is to install a simple exhaust vent in the ceiling over the tub or shower. This allows the steam to escape outside the room and the house and stops it from being absorbed by your ceiling drywall. You can often paint over the discoloration of the drywall after it has been damaged, but if the slab is sagging or cracked in the middle, it needs to be replaced as soon as possible. The last thing you want is for a loved one to be in the bath and the ceiling collapse on them.
Mold is also a threat to this and other moist rooms in the house. Mildew also tends to build up on tile and stone. Mildew and mold are close to the same thing, since they are both fungi, but mold tends to grow on more porous surfaces.
We have all heard horror stories of the bath tub or the toilet falling through the floor and unfortunately, most of the time this is due to the floor boards rotting. Too much water has soaked the floor over the years and has caused the boards to become flimsy. You can prevent this by making sure the floor of your bathroom is a hard, non-porous surface such as tile. The floor should be completely water tight and you may want to even install a drain on the bathroom floor, just to make sure the water goes where it is supposed to.
Even if you have a watertight floor, keeping the bathroom as dry as possible is a good idea. Always dry off the floor and other surfaces in the room after you get done with your shower. This helps lower the humidity in the room and ensures that the person who comes in the room after you does not slip and fall.
The answer to the steam problem is to install a simple exhaust vent in the ceiling over the tub or shower. This allows the steam to escape outside the room and the house and stops it from being absorbed by your ceiling drywall. You can often paint over the discoloration of the drywall after it has been damaged, but if the slab is sagging or cracked in the middle, it needs to be replaced as soon as possible. The last thing you want is for a loved one to be in the bath and the ceiling collapse on them.
Mold is also a threat to this and other moist rooms in the house. Mildew also tends to build up on tile and stone. Mildew and mold are close to the same thing, since they are both fungi, but mold tends to grow on more porous surfaces.
We have all heard horror stories of the bath tub or the toilet falling through the floor and unfortunately, most of the time this is due to the floor boards rotting. Too much water has soaked the floor over the years and has caused the boards to become flimsy. You can prevent this by making sure the floor of your bathroom is a hard, non-porous surface such as tile. The floor should be completely water tight and you may want to even install a drain on the bathroom floor, just to make sure the water goes where it is supposed to.
Even if you have a watertight floor, keeping the bathroom as dry as possible is a good idea. Always dry off the floor and other surfaces in the room after you get done with your shower. This helps lower the humidity in the room and ensures that the person who comes in the room after you does not slip and fall.
Water Underneath Your Home
Unless your have a basement, not many people care much for venturing into that little door that leads underneath your home. The crawl space under there can vary from house to house. If you have ever had the pleasure of going in there, then you know how spooky it can be. It is usually very dark with lots of long ago vacated cobwebs and possibly some more recent occupied ones. It is also a great place for snakes to creep into, as well as mice and small animals.
You might not ever want to go under there, but an occasional look around into the dark depths with a flashlight might be a good thing. Not knowing what is going on under there can result in some bad consequences if left undetected.
If you happen to have central heating and air ductwork running underneath your home, any of the places it may have came loose can cause you to lose heating and cooling efficiency, in turn causing more strain on your unit and your wallet. Brackets holding the duct work off the ground could work loose or rust. It probably won’t happen, but you never know.
A more serious problem can occur if water leakage happens. This can be really bad if it is occurring around the foundation of your home. Over time, it can cause foundation failure. When this happens, the walls inside your home can become affected as well. If you find water under the house it needs to be addressed as soon as possible. Water damage in any form is never good.
Leaking pipes can cause water to puddle in spots under the house also. It does not sound too bad unless the leak happens to be wetting the floor joist. Eventually, it will cause rotting and molding to occur. This can lead to floor damage that can be costly and not easy to repair.
Outside water spigots are another thing you do not worry about until you start to use it and have problems. Usually the handle will start to slip and will not shut off completely. This is very easy to notice, but leaks can also develop in the piping behind the foundation walls where you can not see.
So, if you do go under your house just to have a look around, keep these few things in mind to check out while you are there. A little prevention really can go a long way towards saving time and money later on.
You might not ever want to go under there, but an occasional look around into the dark depths with a flashlight might be a good thing. Not knowing what is going on under there can result in some bad consequences if left undetected.
If you happen to have central heating and air ductwork running underneath your home, any of the places it may have came loose can cause you to lose heating and cooling efficiency, in turn causing more strain on your unit and your wallet. Brackets holding the duct work off the ground could work loose or rust. It probably won’t happen, but you never know.
A more serious problem can occur if water leakage happens. This can be really bad if it is occurring around the foundation of your home. Over time, it can cause foundation failure. When this happens, the walls inside your home can become affected as well. If you find water under the house it needs to be addressed as soon as possible. Water damage in any form is never good.
Leaking pipes can cause water to puddle in spots under the house also. It does not sound too bad unless the leak happens to be wetting the floor joist. Eventually, it will cause rotting and molding to occur. This can lead to floor damage that can be costly and not easy to repair.
Outside water spigots are another thing you do not worry about until you start to use it and have problems. Usually the handle will start to slip and will not shut off completely. This is very easy to notice, but leaks can also develop in the piping behind the foundation walls where you can not see.
So, if you do go under your house just to have a look around, keep these few things in mind to check out while you are there. A little prevention really can go a long way towards saving time and money later on.
Some Interesting Facts You Need to Know About Mold
There are a few things that the average person should know about mold and one of the most obvious ones is that mold growing in the house is dangerous to the health. But, what exactly is mold? Why is it dangerous? How do you get rid of it?
Mold is a fungus and it exists all around us. There are thousands of different species of it and they exist all around the world in more colors than you can think of. Some people seem to think that the words “mold” and “fungus” can be used as replacements for each other, but this is not always the case. All molds are fungi, but not every fungus is a mold. We have been known to eat different fungi around the world such as mushrooms and some kinds of mold have even been used to create such foods as cheese or alcoholic beverages and the fact is that some molds, when used in the creation of food or medicines properly, can be quite beneficial to our health.
The news has been making a big deal over mold the past few years, noting “toxic black mold” in many of its broadcasts. The black mold that it is usually referring to is called Stachybotrys and this is a genus of mold that contains about 10 different species. It grows mostly on dead plants and has been known to grow in homes or businesses. Not every kind of black mold mentioned on the news is Stachybotrys.
People are becoming more and more concerned about hidden mold in their homes and businesses. This is mold that you cannot readily see just by taking a look around your house and is often found tucked away inside air conditioning vents or inside walls. Any mold that has been found to be growing inside the ventilation system should be gotten rid of as soon as possible because every time the air conditioner is turned on, the mold is spread to every corner of your home or business and will be creating health problems for everyone in it.
Mycotoxins are what make some molds so dangerous. These are produced by some molds is what makes the molds dangerous, it is not just the existence of the mold by itself. If a mold does not produce mycotoxins, it is not a significant danger to human health, only the structural health of some buildings that it grows in.
Mold is a fungus and it exists all around us. There are thousands of different species of it and they exist all around the world in more colors than you can think of. Some people seem to think that the words “mold” and “fungus” can be used as replacements for each other, but this is not always the case. All molds are fungi, but not every fungus is a mold. We have been known to eat different fungi around the world such as mushrooms and some kinds of mold have even been used to create such foods as cheese or alcoholic beverages and the fact is that some molds, when used in the creation of food or medicines properly, can be quite beneficial to our health.
The news has been making a big deal over mold the past few years, noting “toxic black mold” in many of its broadcasts. The black mold that it is usually referring to is called Stachybotrys and this is a genus of mold that contains about 10 different species. It grows mostly on dead plants and has been known to grow in homes or businesses. Not every kind of black mold mentioned on the news is Stachybotrys.
People are becoming more and more concerned about hidden mold in their homes and businesses. This is mold that you cannot readily see just by taking a look around your house and is often found tucked away inside air conditioning vents or inside walls. Any mold that has been found to be growing inside the ventilation system should be gotten rid of as soon as possible because every time the air conditioner is turned on, the mold is spread to every corner of your home or business and will be creating health problems for everyone in it.
Mycotoxins are what make some molds so dangerous. These are produced by some molds is what makes the molds dangerous, it is not just the existence of the mold by itself. If a mold does not produce mycotoxins, it is not a significant danger to human health, only the structural health of some buildings that it grows in.
How To Repair Water Damaged Electronics and cell phones
A lot of people have had their electronic devices come into contact with liquid, whether it’s a glass of milk or a bathtub full of water, but most people do not know what they are supposed to do with these items afterward. Can they be fixed? Is there really anything wrong with them?
Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation.
Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again.
Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably.
Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired.
Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation.
Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again.
Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably.
Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired.
Saturday, January 26, 2008
A General Facts Guide About Mold: Mold needs nutrients
Whether you are indoors or outdoors, mold is always there. No matter where you are, there is no such thing as an environment on the planet earth that is considered to be mold-free. Wherever there are the three things that mold need to survive, there will be mold, even though you might not be able to see it. Mold is only visible to the human eye when colonies of it start to grow. Just what does mold need to grow?
Mold needs nutrients. In an outdoor environment, this would be organic matter such as dead plants or animals. This is a necessary natural event that has to take place to get rid of the some of the debris that builds up on the forest floor. In the indoor environment, molds often feed on building materials. These can include cardboard, paper on both the sides of drywall, soap, fabrics, and other kinds of dust.
Moisture is also required by mold in order to survive. In order to begin decaying organic matter and digesting it, it needs moisture. Mold often grows inside the home during the summer when moisture becomes trapped inside the house and in the house in the winter when certain areas become drafty and condensation builds up in areas.
Something else mold needs to survive is very simple and we all have a lot of it, whether we realize it or not. Mold needs time to grow. It can start to form a colony as soon as 24 hours up to ten days after it gets enough of the nutrients and moisture that it needs to survive. The longer you allow something such as a wet towel or wet piece of clothing to lie on the floor in the back of your closet, the more time you are giving mold to start growing on it.
One last thing that molds tend to need in order to continue growing is heat. Not all molds need a significant amount of heat in order to grow, but many do. Molds have been known to survive at extreme temperatures and remain dormant, but not actually continue growing. They can be exposed to temperatures around 2 degrees Celsius and still only become dormant instead of dying like some other organisms would do.
Mold needs nutrients. In an outdoor environment, this would be organic matter such as dead plants or animals. This is a necessary natural event that has to take place to get rid of the some of the debris that builds up on the forest floor. In the indoor environment, molds often feed on building materials. These can include cardboard, paper on both the sides of drywall, soap, fabrics, and other kinds of dust.
Moisture is also required by mold in order to survive. In order to begin decaying organic matter and digesting it, it needs moisture. Mold often grows inside the home during the summer when moisture becomes trapped inside the house and in the house in the winter when certain areas become drafty and condensation builds up in areas.
Something else mold needs to survive is very simple and we all have a lot of it, whether we realize it or not. Mold needs time to grow. It can start to form a colony as soon as 24 hours up to ten days after it gets enough of the nutrients and moisture that it needs to survive. The longer you allow something such as a wet towel or wet piece of clothing to lie on the floor in the back of your closet, the more time you are giving mold to start growing on it.
One last thing that molds tend to need in order to continue growing is heat. Not all molds need a significant amount of heat in order to grow, but many do. Molds have been known to survive at extreme temperatures and remain dormant, but not actually continue growing. They can be exposed to temperatures around 2 degrees Celsius and still only become dormant instead of dying like some other organisms would do.
Subscribe to:
Posts (Atom)
